Solid Brass Woodscrew - Needlepoint Fine
Needlepoint fine/self tapper woodscrews are a fine rolled thread.
When used in soft or composite timber products, they can be suitable for use without a pilot hole, particularly in shorter screws.
It is recommended that you test the fastener in your material, as even our high tensile brass, when over torqued can break.
SLOT DRIVE FLAT
A traditional countersunk or flat head woodscrew - designed to finish flush with the surface of your timber/hardware.
With deep well cut slots, these screws can be power driven with the correct size driver tip.
Stock sizes: 10g.
SQUARE DRIVE FLAT
A countersunk or flat woodscrew with a square (robinson) drive. With deep set square socket, our screws have a positive engagement, enabling a rigid alignment of the fastener on the driver, ideal for hard to reach places.
Stock Sizes: 6g - 10g
PHILLIPS DRIVE FLAT
A countersunk or flat woodscrew with a Phillips drive.
Stock Sizes: 5g - 10g
SQUARE DRIVE OVAL
With an oval or raised head, this screw has both a countersink to recess into your work, and a raised head to provide a stylish and unqiue finish. Ideally suited to handles, old style switch surrounds and other antique hardware and fixings as well as woodwork.
Stocked sizes: 8g x 1 1/4"
SQUARE DRIVE ROUND
A round or dome head, this screw finishes proud to your timber/hardware, with a hemispherical head.
With deep set square socket, our screws have a positive engagement, enabling a rigid alignment of the fastener on the driver, ideal for hard to reach places.
Stocked Sizes: 6g